- High flow range up to 80L/min
- Unique intelligent voice alarm
- PM2.5 filter
- Wide dew-point temperature regulation at 29, 31, 34 and 37 degree
- Decomposes oxygen molecules so that oxygen can easily enter blood cells to provide energy for the body, suitable for critically ill patients
Treatment Mode: High flow mode, Low flow mode
FiO2: 21%-100% (manual)
Dew-point temperature range: 29, 31, 34, 37°C Four levels
Flow Range: Flowrate 2-80L/min
Monitored Parameters: Temperature, Flowrate, Oxygen concentration, Respiratory frequency; Optional: SpO2, Pulse rate
Trend Graph: 1, 3, 7 days trend review
Voice Alarm: Standard
Oxygen Sensor: Non consumable material
Nurse call: None
Weight: 3 kg
Chamber capacity: ≥100ml
Tube: Length: 1.8 ± 0.18m
Transportation and storage
Temperature: -10 ~ +60 deg
Humidity: 10% – 95%, non-condensing
Atmospheric pressure: 70kPa – 106kPa
Power: 100-240 VAC, 50/60 Hz, 1.5A-2.5A
Safety Type: Class II, BF
Waterproof level: IP21
Noise: When flow is 80L/min, the A-weighted sound pressure level of noise is not more than 45 dB
Temperature regulation range: 29ºC, 31ºC, 34ºC, 37ºC
Air temperature at patient junction: < 43ºC
Humidifying capacity: Target temperature is 29 – 36ºC, the humidity is higher than 12 mg/L. Target temperature is 37ºC, the humidity is higher than 33 mg/L.
Heating plate power: < 160W
Regulating range of FiO2: 21% – 100%
Flow regulation range
In low flow made, setting range: 2L/min – 25L/min
In high flow made, setting range: 10L/min – 80L/min
Preheating time: 23ºC, flow 35L/min, delivery gas temperature reaches 29ºC in 10 minutes, and reaches 37ºC in 30 minutes.
Accuracy of oxygen sensor: The monitoring accuracy is ± (2.5% volume percentage +2.5% gas concentration)
SpO2 Monitoring Monitoring range: 35 – 100%, monitoring accuracy is ±2% of reading when ≥70%, less than 70% undefined
PR Monitoring: Monitoring range 30 – 240 PR/min, monitoring accuracy ±3 PR/min or ±2%, take the maximum
PP Monitoring: Monitoring range 4 – 45BPM, monitoring accuracy ± 15% or ± 4 times/min, take the maximum
REimagined Healthcare with
BUZUD Care Experience:
585 North Bridge Road,
#01-02 Raffles Hospital,
Call: +65 6518 9959
BUZUD is a Singapore Healthcare and Aesthetics brand.
This product supported by Fosun Trade Medical Device, is approved by Singapore Health Sciences Authority (HSA), and is also widely approved by health authorities globally.
- Information provided herein is not intended as dispensing medical advice(s). User(s) should consult their doctor for any doubt or to seek further clarification prior to use of the said product.
- User(s) is / are advised to refer to the product manual provided for more details and instructions of use. We shall not be held responsible for all informations presented herein which is merely consolidated as a product overview with descriptions in general.
- All images presented herein are for illustration and visual purposes only, and may varied from the final product delivered. Actual specifications, weight, and prices of the product may deviate, and subjected to change(s) at any time.
There are no reviews yet.