REimagined Easy Breathing, Effortlessly.

Breathlessness not only robs you of quality sleep, it can also cause multiple organ failures if the needed amount of
oxygen is compromised. Be oxygenated with our non-invasive and automatic pressure adjusting sleep breathing
treatment ventilator, intelligently engineered with responsive and intuitive sensors to monitor and adjust internal airflow
and pressure in the airway. The device can identify the patient’s current respiratory condition and define the parameters
for intervention need with adjustable or prescribed pressure setting to regulate breathing.

FEATURES

1. AS-ELex Expiratory Pressure Release
2. Multiple levels of adjustable ramp time
3. Intelligent pressure adjustment according to
airway resistance changes
4. Choose between AutoCPAP and CPAP modes
5. Light-weight, portable and silent

SPECIFICATIONS

Device Dimensions: 160mm × 148mm ×
99.5mm, or 247mm × 148mm × 99.5mm
(with the humidifier)

Weight: 0.82 kg, or 1.26 kg (with the humidifier)

Operation, Transport and Storage
Operation: Transport and Storage
Temperature: 5 to 35°C; -20 °C to +60°C
Humidity: 10% to 93% Non-condensing;
10% to 93% Non-condensing
Atmospheric Pressure: 760 to 1060 hPa;
500 to 1060 hPa

SD Card: With a capacity≥8 G, the SD card can
record patient data and fault information.

AC Power Consumption: 100-240VAC,
50/60 Hz, 2.0 A max
Type of Protection Against Electric
Shock: Class II Equipment
Degree of Protection Against Electric
Shock: Type BF Applied Part
Degree of Ingress Protection: IP22
Pressure Unit: Units are expressed in
cm H2O and hPa,1 cm H2O is equal to
0.98 hPa.
Pressure Range: 4 to 20 hPa (in 0.5
hPa increments), ≤30 hPa under single
fault conditions.
Pressure Display Accuracy: ±0.5 hPa
Pressure Stability: 4 to 20 hPa
(±1 hPa)

Ramp time: The ramp time ranges
from 0 to 60 minutes.
Sound Pressure Level: <30 dBA with
uncertainty of 2 dBA, when the device
is working at the pressure of 10 hPa.
Sound Power Level: <38 dBA with
uncertainty of 2 dBA, when the device
is working at the pressure of 10 hPa.

Measurement system uncertainties
In accordance with
ISO 80601-2-70:2015 the
measurement uncertainty of the
manufacturer’s test equipment is:
For measures of flow1 : ±2% of reading
or 0.05 Std L/min, whichever is greater
For measures of pressure1 :
±(0.1hPa +1.5% of reading)
1 Results are expressed at STPD
(Standard Temperature and Pressure,
Dry).

Pressure accuracy

Maximum static pressure variation at
10 cm H2O (10 hPa) according to
ISO 80601-2-70:2015:
Without humidification: 0.5 hPa
With humidification: 0.5 hPa
Tube
Length: 1.8m
Inner diameter: 19mm

The Form and the Dimensions of the Patient Connection Port
The 22mm conical air outlet complies
with ISO 5356-1.

REimagined Healthcare with
BUZUD Care Experience:

585 North Bridge Road,
#01-02 Raffles Hospital,
Singapore 188770

Call: +65 6518 9959
Email: customercare@BUZUD.com

www.BUZUD.com

BUZUD is a Singapore Healthcare and Aesthetics brand.

CERTIFICATION

This product supported by Fosun Trade Medical Device, is approved by Singapore Health Sciences Authority (HSA), and is also widely approved by health authorities globally.

DISCLAIMER

1. Information provided herein is not intended as dispensing medical advice(s). User(s) should consult their doctor for any doubt or to seek further clarification prior to use of the said product.

2. User(s) is / are advised to refer to the product manual provided for more details and instructions of use. We shall not be held responsible for all informations presented herein which is merely consolidated as a product overview with descriptions in general.

3. All images presented herein are for illustration and visual purposes only, and may varied from the final product delivered. Actual specifications, weight, and prices of the product may deviate, and subjected to change(s) at any time.